UHN-50M Chemical Nickel Plating Plant

Description

The UHN-50M unit is designed for chemical nickel plating of parts made of carbon and corrosion-resistant steels, aluminum, titanium, copper and alloys based on them with repeated use of the solution. The installation of the UHN-50M provides coverage of parts of a complex configuration that do not contribute to the formation of gas "plugs". In holes, channels, cutouts, on concave sections of deeply profiled parts, the coating thickness is reduced by 50% compared to the outer surfaces. In blind holes d5 - d12 mm and through holes d1.5 - d6 mm, the coating thickness is normalized at a depth of one diameter. Technical specifications: Productivity, m2/h 0.5 Coating speed, microns/h (at least) 15 Surface of simultaneously coated parts, m2 (max) 0.5 The volume of the reactor bath, l 60 ± 1 The volume of the reaction zone, l 48 ± 2 Heating of the upper zone of the reactor bath (through the walls) TEN The temperature of the solution in the working area, ° C 362 ± 2 The temperature of the solution in the working area, ° C 90 ± 2 Heating time of the solution to the operating temperature, min 60 Working area depth, mm 300 Cooling of the lower zone of the reactor bath with water The volume of the correction tank, l 30 Supply of correction solution peristaltic pump Ammonia solution supply peristaltic pump Maximum dimensions of the covered part, mm 300x300x250 Power engineering: voltage of alternating three-phase current with a frequency of 50 Hz, 380 V pressure of technical water supply, MPa (not less than) 0.1 power consumption, kW, not more than 7 Dimensions, mm: nickel plating module 650x950x1150 control stand 600x300x1200 Weight, kg 100

Specifications

• Quantum Supplies