UHN-250M Chemical Nickel Plating Plant

Description

The UHN-250M unit is designed for chemical nickel plating of parts made of carbon and corrosion-resistant steels, aluminum, titanium, copper and alloys based on them with repeated use of the solution. The installation provides coverage of parts of complex configuration that do not contribute to the formation of gas "plugs". In holes, channels, cutouts, on concave sections of deeply profiled parts, the coating thickness is reduced by 50% compared to the outer surfaces. In blind holes d5 - d12 mm and through holes d1.5 - d6 mm, the coating thickness is normalized at a depth of one diameter. Technical specifications: Productivity, m2/h 2.5 Deposition rate of the coating, microns/h (not less than) 15 Surface of simultaneously coated parts, m2, (not more than) 2.5 The weight of the parts simultaneously hung on the swing mechanism, kg, no more than 20 The total volume of the bath, l 350 The volume of the working area, l 250 Internal dimensions of the working area, mm: length, mm 1000 width, mm 500 depth, mm 600 Heating (through the walls) TEN Temperature control (on walls and in solution) two-channel The temperature of the solution in the working area, degree K (° C) 363+2 (90+2) Heating time of the solution to the operating temperature, min 60 The volume of the correction tank, l 40 The supply of the correction solution has stopped the hydraulic pump Supply of ammonia solution with a hydraulic pump Maximum dimensions of the covered part, mm 850x400x320 Power engineering: three-phase alternating current voltage with a frequency of 50 Hz, V 380 ± 38 technical water supply pressure, MPa (not less than) 0.1 power consumption, kW, not more than 24 Dimensions, mm 1650x1250x1400 Dimensions of the reactor bath, mm 1000x500x750 Installation weight, kg, not more than 300 * - The dimensions of the UHN-250M reactor bath can be changed if necessary.

Specifications

• Quantum Supplies

• Brand / TM.

  Энексис