UHN-400M Chemical Nickel Plating Plant

Description

The UHN-400M unit is designed for chemical nickel plating of parts of complex configuration made of carbon and corrosion-resistant steels, aluminum, titanium, copper and alloys based on them with repeated use of the solution. The installation of the UHN-400M provides coverage of parts of a complex configuration that do not contribute to the formation of gas "plugs". In holes, channels, cutouts, on concave sections of deeply profiled parts, the coating thickness is reduced by 50% compared to the outer surfaces In blind holes d5 - d12 mm and through holes d1.5 - d6 mm, the coating thickness is normalized at a depth of one diameter. Technical specifications: Productivity, m2/h 4.0 Deposition rate of the coating, microns/h (not less than) 15 Surface of simultaneously coated parts, m2 (max) 4.0 The weight of the parts simultaneously hung on the swing mechanism, kg, no more than 20 Total volume of the bath, l 560 The volume of the working area, l 400 Internal dimensions of the working area, mm: length 1200 width 550 depth 700 Heating (through the walls) TEN Temperature control (on walls and in solution) two-channel The temperature of the solution in the working area, °C 363 ± 2 The temperature of the solution in the working area, ° C 90 ± 2 Heating time of the solution to the operating temperature, min 100 Maximum dimensions of the covered part, mm 1100x400x600 The mechanism for feeding the correction solution is a peristaltic pump Mechanism of supply of ammonia solution peristaltic pump Power engineering: voltage of alternating three-phase current with a frequency of 50 Hz, 380 V pressure of technical water supply, MPa (not less than) 0.1 power consumption, kW, not more than 35 Dimensions, mm 1700x1000x1400 Dimensions of the reactor bath, mm 1200x550x900 Installation weight, kg, not more than 300 * - The dimensions of the UHN-400M reactor bath can be changed if necessary.

Specifications

• Quantum Supplies