UHN-150M Chemical Nickel Plating Plant

Description

The UHN-150M unit is designed for chemical nickel plating of parts made of carbon and corrosion-resistant steels, aluminum, titanium, copper and alloys based on them with repeated use of the solution. The installation of the UHN-150M provides coverage of parts of a complex configuration that do not contribute to the formation of gas "plugs". In holes, channels, cutouts, on concave sections of deeply profiled parts, the coating thickness is reduced by 50% compared to the outer surfaces. In blind holes d5 - d12 mm and through holes d1.5 - d6 mm, the coating thickness is normalized at a depth of one diameter. Technical specifications: Productivity, m2/h 1.5 Deposition rate of the coating, microns/h (not less than) 15 Surface of simultaneously coated parts, m2 (max) 1.5 The weight of the parts simultaneously hung on the swing mechanism, kg, no more than 20 The total volume of the bath, l 210 The volume of the working area, l 150 Internal dimensions of the working area, mm: length 600 width 500 depth 600 Heating (through the walls) TEN Temperature control (on walls and in solution) two-channel The temperature of the solution in the working area, ° C 362 ± 2 The temperature of the solution in the working area, ° C 90 ± 2 Heating time of the solution to the operating temperature, min 60 Supply of correction solution peristaltic pump Ammonia solution supply peristaltic pump Maximum dimensions of the covered part, mm 450x400x500 Energy: voltage of alternating three-phase current with a frequency of 50 Hz, 380 V pressure of technical water supply, MPa (not less than) 0.1 power consumption, kW, not more than 18 Dimensions, mm 1400x1000x1400 Dimensions of the reactor bath, mm 600x500x800 Installation weight, kg, not more than 300 * - The dimensions of the UHN-150M reactor bath can be changed if necessary.

Specifications

• Quantum Supplies

• Brand / TM.

  Энексис