Hydraulic Excavator

Description

Crawler hydraulic excavator, very detailed radio-controlled model. Designed specifically for heavy conditions of transportation of gravel, sand, asphalt, snow, wood chips or stones. Made of 100% aluminum (except caterpillar and hydraulic pump made of steel), fully assembled and ready to work! Fully painted(yellow powder coating) Steel hydraulic system(brushless system) Operator's workplace in scale (the figure of the driver and the seat can fit) Steel molded tracks (width 50 mm, carbon steel grade 45) Heavy duty hoses (outer diameter 4.5 mm, nylon, inner diameter 2.5 mm) The undercarriage rotates 360 degrees Length: 1150 mm Width: 250 mm Height: 840 mm Weight: 20 kg Inner length of the cabin: 120 mm Inner width of the cabin: 65 mm Internal cabin height: 135 mm Maximum cylinder thrust: 109 kg Digging Force: 15 kg/33 lbs Digging depth: 495mm/19.4 inches Driving speed: 310 meters per hour Recommended payload: 15 kg Maximum lifting capacity: 42 kg Brush drive motor Hydraulic pump with brushless drive 1000KV This product is professionally pre-assembled Notes: Do not use more than Lipo 3S batteries. (11.1 volts(s)) Once the hydraulic cylinder reaches its maximum height, do not push further. Before starting the ESC, you must turn on the transmitter. ESC supports XT60 connector Before starting, we recommend checking the fastening connections of the equipment Use high-quality hex screwdrivers to avoid cutting off the screw heads. Use the thread retainer when screwing metal screws into metal parts. Do not tighten the screws too much, otherwise the thread may be torn off. The axle hubs can be unscrewed, but pliers with nylon tips may be required if they are tightened very tightly.