Pressure gauge with diaphragm separator for injection screw pump

Description

Pressure gauge with membrane media separator Titanium In stock. Delivery to any city of the Russian Federation. The pressure gauge is deformable with a tubular spring, vibration-resistant with liquid filling (glycerin). It can be used on all models of Titanium-706 and Titanium-Profi pumps, as well as on any similar pumps and plastering stations with a pressure of no more than 25 Bar (2.5 MPa) This pressure gauge works with any cement and other materials, is not subject to clogging and hardening of the working part, and is designed for constant accurate pressure monitoring during injection, cementation and other work with the pump. It is used in areas with increased vibration and pulsation. The protective cover made of rubber is included. Main technical data: Reading range: 0...25 bar (0..2.5 MPa) Accuracy class: 1.5 Nominal diameter: 63mm Thread on the divider: 3/4 HP Connection: radial, with membrane separator, with front membrane G 3/4 The ambient temperature is -20...+60°C Max. temperature of the measured medium +60°C It is mandatory to use a pressure gauge with a media separator when injecting at historical sites for restoration; at precisely specified pressure in the design documentation; during repair work in weakened brickwork; during injection work by employees without experience. Attention! Installation / disassembly should be carried out with a key only FOR the SEPARATOR. It is FORBIDDEN to unscrew the pressure gauge from the separator, the measurement accuracy will be disrupted. The measuring membrane on the separator can ONLY be cleaned with a soft brush. To install on a 1/2" main line, use a 3/4" by 1/2" ADAPTER. If the pressure gauge is located for a long time at temperatures below -20 degrees Celsius, it is necessary to keep the pressure gauge indoors at a positive temperature for at least 12 hours before work, to defrost glycerin.

Specifications

• Manufacturer's article number

  Титан-25

• Brand / TM.

  Титан