Astratek-Universal, 20L

Description

Thermal insulation of Astratek universal has truly the widest application. It insulates brick surfaces, concrete partitions, foundations, metal structures, plastic groups, wooden walls and roofs equally well. It has the protective properties of a treated surface with a very long service life. ASTRATEK universal is effective for additional thermal insulation, elimination of freezing in various fields of application in industry and housing and communal services. Small coating thickness (1 mm. The astratek is equal to 50 mm. mineral wool), high vapor permeability and environmental friendliness allows the material to be used from the inside in industrial, household and medical premises, warming them, preventing the appearance of dampness, mold and mildew. Advantages over traditional insulation: Easy to apply: it is applied with a brush, a spatula or a special device. As a rule, the involvement of highly qualified specialists, expensive tools is not required, and as a result, the terms and estimated cost of work are reduced. No additional load on the foundation, load-bearing structures and the possibility of isolating curved surfaces without stopping technological processes. The operating temperature ranges from – 60 to + 200 degrees Celsius. Long service life: up to 30 years or more. Consumption: Laboratory consumption (excluding losses) is 1 liter per 1 square meter with a layer thickness of 1 mm. The actual consumption depends on the quality of preparation of the insulated surface and the number of layers applied. The thickness of the final layer depends on the task that needs to be solved with the help of Astratek thermal insulation and can range from 1 to 5 mm. IMPORTANT INFORMATION: Astratek liquid thermal insulation is a thick (like sour cream) mass of white color one and a half times lighter than water. A bucket of 20 liters weighs only 12 kilograms. The composition of thermal insulation includes high-quality acrylic paint (binder), ceramic micro granules (providing thermal insulation) and additional additives that increase the performance of thermal insulation. During storage and transportation, ceramic micro granules float up, forming a dry crust on the surface, and the liquid sinks to the bottom of the bucket. Before use, it is necessary to mix the entire volume of the bucket from bottom to top. The working viscosity of the composition can be adjusted by adding water to it (no more than 5%). For more information about the use of thermal insulation "Astratek", please check with the manufacturer. Recommendations for use: The recommended thickness of one layer is 0.5 mm. The minimum working layer is 1 mm. The maximum working layer is 5 mm. The drying time of each layer is 24 hours. The surface must be primed and cleaned of dust, dirt, grease stains, mold and mildew. The minimum temperature at which thermal insulation can be applied is +5 degrees.

Specifications

• Brand / TM.

  Astrathek

• View of goods

  Heat insulation

• Quantum Supplies

• Brand / TM.

  Астратек