Thermal insulation polymer coating Astratek-Facade, 20L

Description

The unique composition of the Astratek facade coating makes it possible to reduce heat losses, and as a result, to obtain significant energy savings for heating and air conditioning systems of buildings and structures. A special formula with high viscosity reliably insulates vertical structures. What makes the Astratek facade coating indispensable during restoration work, as well as in new buildings. Advantages over traditional insulation: Provides continuous coverage of the object with the elimination of "cold bridges". Easy to apply: it is applied with a brush, a spatula or a special device. As a rule, the involvement of highly qualified specialists, expensive tools is not required, and as a result, the terms and estimated cost of work are reduced. No additional load on the foundation, load-bearing structures ( 1 mm. Astratek replaces 50 mm. mineral wool). It has hydrophobic properties, does not accumulate moisture and does not collapse under the influence of atmospheric phenomena. Does not support gorenje, reduces smoke generation and fire spread; non-toxic, environmentally friendly. Possibility of isolation of complex curved surfaces. The operating temperature ranges from – 60 to + 200 degrees Celsius. Long service life: up to 30 years or more. The ability to color in the selected color. Consumption: Laboratory consumption (excluding losses) is 1 liter per 1 square meter with a layer thickness of 1 mm. The actual consumption depends on the quality of preparation of the insulated surface and the number of layers applied. The thickness of the final layer depends on the task that needs to be solved with the help of Astratek thermal insulation and can range from 1 to 5 mm. IMPORTANT INFORMATION: Astratek liquid thermal insulation is a thick (like sour cream) mass of white color one and a half times lighter than water. A bucket of 20 liters weighs only 12 kilograms. The composition of thermal insulation includes high-quality acrylic paint (binder), ceramic micro granules (providing thermal insulation) and additional additives that increase the performance of thermal insulation. During storage and transportation, ceramic micro granules float up, forming a dry crust on the surface, and the liquid sinks to the bottom of the bucket. Before use, it is necessary to mix the entire volume of the bucket from bottom to top. The working viscosity of the composition can be adjusted by adding water to it (no more than 5%). For more information about the use of thermal insulation "Astratek", please check with the manufacturer. Recommendations for use: The recommended thickness of one layer is 0.5 mm. The minimum working layer is 1 mm. The maximum working layer is 5 mm. The drying time of each layer is 24 hours. The surface must be primed and cleaned of dust, dirt, grease stains, mold and mildew. The minimum temperature at which thermal insulation can be applied is +5 degrees.

Specifications

• View of goods

  Heat insulating polymer coating

• Volume (l)

• Brand / TM.

  Astrathek

• Primary packaging

  Hermetic containara

• Number of goods at first. Packing

• Weight (kg)

• Quantum Supplies

• Unit of shelf life

  24 month

• Brand / TM.

  Астратек

• Barcode

  4620002840105