Filler cable coupling for cables with plastic insulation up to 1 kV MKS-1

Description

Designed for connecting power cables: - with plastic insulation (PVC/SPE) - with or without armor - for voltage up to 1 kV Coupling composition: - two-component quick-setting polyurethane compound - plastic transparent case - a block of KSM connectors in a polymer housing (denoted by the letter (B)) - constant pressure PPD springs (in the couplings for the ISS armor (b)) - a flexible, copper, insulated grounding conductor (PV-3 or analogs) (in the couplings for the ISS armor (b)) - a sealant tape - PVC insulation tape - sandpaper - latex protective gloves of the installer Meets the requirements of GOST 13781.0-86 Types of cables to be mounted: (A)VVG, NYM, (A)PvVG, (A)VBBSHV, (A)PVBBSHV, (A)PVBBSHP The coupling kit is universal and can be used on 3-core, 4-core and 5-core cables To connect the cores, an isolated block of KSM connectors is contained in a set of couplings with the letter (B) It is also possible to use sleeves for crimping to connect the cores A two-component self-hardening polymer compound is used as an insulating and sealing agent The polymer compound is delivered in separate sections of a strong polyethylene package with a separator. During installation, the separator is removed and the compounds are thoroughly mixed before pouring into the coupling housing They do not require the use of an open flame for installation and can be used in places with special requirements for fire and explosion safety The transparent housing of the coupling provides visual control over the uniform filling of all inter-core voids Complete tightness of the joint due to the use of a hydrophobic compound The recommended temperature of mixing, pouring and solidification of the compound is not lower than plus 10 °C The solidification time of the compound at room temperature is no more than 2 hours