Picaso Designer X S2 3D Printer

Description

Picaso Designer X S2 3D Printer Designer X series 2 is an affordable tool for solving professional tasks. Active heated camera Before printing, the air in the 3D printer chamber is heated to the target temperature (up to 80 degrees Celsius). The set temperature is then continuously maintained throughout the printing process. Thanks to this feature, you can use the entire useful volume of the printer's camera to print almost any material, including materials with high shrinkage. Thanks to the active heated chamber, it is possible to print using a larger range of materials than 3D printers without a heated chamber, and achieve higher rates of interlayer adhesion (increased strength) and a more accurate match with the digital model. Examples of 3D printing materials: PLA, ABS, ASA, PP, TPU, PETG, HIPS are basic materials that can be used to print on the entire camera with the best inter-layer adhesion and minimal deviations from the digital model. PA (6/12), ABS (GF/CF), PC, TPU (and derivatives) are engineering materials that allow printing products with increased consumer properties (temperature, chemical resistance, physical and mechanical properties). PEEK, PEKK, PPSU, ULTEM are structural materials with high operating temperatures and the best consumer properties. The print volume in the camera is limited and depends on the geometry of the model. Print speed The new movement algorithm makes it possible to optimize all movements of the print head. As a result, the printing speed has increased without losing the surface quality of the part. New electronics and firmware A new generation of electronics has been developed, including software and hardware solutions — touch screen, control boards and drivers, wireless Wi-Fi connection and a new generation of firmware. All this significantly increases the speed of the printer. Magnetic encoders The control system for the supply and availability of plastic has been redesigned. Now all printers use magnetic encoders, which are faster than optical encoders, which in most cases avoids problems with feeding the material. Reinforced thread feeding mechanism (preparation for working with abrasive materials) The starter printer is ready to work with composite and abrasive materials. Node reliability has been improved and the service interval has been extended. Cloud-based database of printing materials profiles There are more than 70 content profiles available in the cloud service, which are constantly being updated. Each material has its own unique profile, which ensures high print quality. Users usually use no more than 5-6 different materials, so there is no need to store all the profiles in the printer's memory. Instead, you can download only the required set of profiles and use it. To quickly and conveniently write a profile to a printer, you can use the option to download it from a cloud service directly over the Internet. In addition, you can work with material profiles through the Polygon X program. Polygon X Software for job preparation and remote print monitoring The Polygon X program is PICASO 3D proprietary software for preparing assignments, transferring them to 3D printers, and monitoring 3D printing. Polygon X contains presets for the best printing and can be used even by an untrained specialist. Polygon X provides convenient operation with a large number of 3D printers at the same time without increasing the staff. It is supplied free of charge with the printer. Specifications FDM/FFF printing technology Picaso Manufacturer Country of origin Russia Net weight 16.5 kg Dimensions 390 x 425 x 525 mm Nozzle diameter 0.5 mm Ethernet, USB Flash, and Wi-Fi interfaces Number of extruders 1 Body material Aluminum (composite) Materials ABS, ASA, FLEX, Flex (TPE), Flex (TPU), HIPS, Nylon, PA, PC, PETG, PLA, PMMA, PP, PPS, PS, PVA, RUBBER, SBS, TPU, WOOD (wood), Metal Construction area 201 x 201 x 210 mm Print speed 130 mm/s Table temperature 150 °C The temperature of the extruder, °C 430⁰C Layer thickness, microns 10 microns File formats gcode, plgx, stl, amf, 3ds, obj The body structure is closed

Specifications

• Manufacturer's article number

  Picaso Designer X S2

• Manufacturer country

  Russia