MikroTik RBwAPGR-5HacD2HnD&R11e-LTE6 Router

Description

The all-weather access point with two bands (2.4 / 5 GHz) is designed based on the wAP form factor. Equipped with two Gigabit Ethernet ports - wAP ac LTE kit can be used as a wired router with LTE redundancy function via micro-SIM slot. wAP ac LTE kit has two Gigabit Ethernet ports — you can use the device as a wired router with backup LTE via the Micro SIM slot. In addition, you can also use a wireless connection anywhere — indoors or outdoors. wAP ac LTE is designed to provide a strong and reliable connection in almost any situation and weather conditions. It can withstand temperatures from -30°C to +60°C and is easily mounted on walls, ceilings or pillars. Technical specifications: 1) IPQ-4018 716 MHz processor, 4 cores 2) ARM architecture (32 bit) 3) 128 MB RAM 4) 16 MB FLASH ROM 5) 2x 10/100/1000 Ethernet network interface 6) 2.4GHz radio interface of standards 802.11b/g/n, MIMO 2x2, Wi-Fi 4; 5 GHz of standards 802.11a/n/ac, MIMO 2x2, Wi-Fi 5 7) The maximum data transfer rate is 300 Mbit/s (2.4GHz), 867 Mbit/s (5 GHz) 8) Output power Up to 20 dBm for RF (up to 24 dBm for other countries) 9) Connection interface 1x micro-SIM for modem, 1x miniPCI-e 10) IPQ-4018 Wireless communication chip (2.4/5 GHz) 11) Maximum Wi-Fi antenna gain 2.5 dBi 12) The maximum gain of the LTE antenna is 4 dBi (with a u.FL connector) 13) Antenna pattern width 360° 14) LTE-category 6 (300 Mbit/s — downlink, 50 Mbit/s — uplink) 15) 3G-category R7 (21 Mbit/s — downlink, 5.76 Mbit/s — uplink), R8 (42.2 Mbit/s — downlink, 5.76 Mbit/s — uplink) 16) 2G-category Class 12 17) Input power 18 - 57V (Passive PoE or active 802.3af/at), 10 - 57V (DC Jack) 18) Maximum power consumption 16W, 10W (without connected devices) 19) Operating ambient temperature -30.. +60°C (tested) 20) Optional board temperature sensor, voltage sensor 21) RouterOS Level 4 operating system